Background Color:
 
Background Pattern:
Reset
Call us toll free: (877) 643-6134
  • Live Chat

    Why wait? Chat with one of our service personnel now.

  • Call Us Toll Free
    (877) 643-6134

    Phone: (972) 317-4187
    Fax: (972) 499-1306

  • Questions Welcome

    Use the form below to send us a question. We will get back to you as soon as possible.

Remote Telemetry Health Check

Do you want your people to do a Telemetry Health check on the infrastructure? 

Do you need to perform an telemetry infrastructure check?

Do you know how your Telemetry infrastructure is performing?

Are you having dropout issues?

What does a Remote Telemetry Health check involve?

  • We ship your a spectrum analyzer, cables and computer for a remote checkup.
  • We assist you by controlling and interpreting the spectrum analyser.
  • With our help your Biomeds connect up the cables and we connect remotely.
  • We assist your biomeds verify that all antennas are working
  • Verify that each antenna's output is working within specifications
  • Verify that the hospital has all documentation on the antenna and splitter board layouts
  • Provide results to the hospital
Questions and Answers
  1. How does a remote Telemetry Health Check work?
    1. CTS sends the equipment to the hospital to do the health check. CTS will log into the remote PC and your biomeds will walk the hospital antennas to do the checkout.
  2. What is dropout?
    1. Dropout is the gap that appears in the ECG/EKG waveform when monitoring patients. These can be minute to several inches in length and the frequency can be a little to where a waveform is considered unreadable.
  3. How do we know if the dropout that we see is an antenna problem?
    1. The first thing to do is at the CIC, get to a command prompt and issue the command " setflags -mark all" If you see any yellow "tick marks" on the screen, this is dropout form the system and should be investigated further. If any other color lines show up call us to
    2. After looking at the system to turn off the marks at the same command prompt issue the command " setflags -mark off".
    3. NOTE - The central is not approved to keep monitoring patients while using the -mark all command during long term monitoring. This is for diagnostic purposes only.  
  4. How often should the system be checked?
    1. The antenna infrastructure should be certified annually. This is according to GE Healthcare specifications.
  5. Will Clinical Technology Solutions repair the system if you find any issues during the Telemetry Health checkup?
    1. Yes, we will provide an estimate of repair if we discover any components that are not performing up to standard.
  6. What is the first step and what will it cost to repair the system?
    1. We will do a telemetry health check first. This will give us a clear snap shot of the system and we can then figure out exactly what will need to be done to fix the system. 
  7. How long does the Telemetry Health checkup take?
    1. The Health checkup is about 2 day normally.

 

Call or email us to get a quote on either a Telemetry Health Check or Telemetry Tuneup (877) 634-6134